Either cross-lacing, like on the models above, or straight bar lacing are the best ways of tying things up. The very first high-top skate shoe, the Vans Sk8-Hi brought a completely fresh look to the park when it was first launched in With its high-top styling and eight pair of eyelets, the Vans Sk8-Hi needs a long lace in order to reach the top.
In terms of colour and style, flat white laces look best with this particular model and will work with pretty much any colour of shoe other than all black. Due to the height of this model, bar laces will work best as it gives a more simple, pared-back finish cross lacing is a little fussy in this instance. Now a staple fixture on the roads of Britain and beyond, the van was firs… Oh, hang on, wrong type of vans. Fast forward to the end of the s, and Vans had 70 stores in California and was already starting to sell internationally.
Demand never ceased, and today, especially with skate style enjoying a renaissance in recent years, the Vans brand is nothing short of a household name. Lace your Vans normally, according to your preference, and when it comes time to tie the shoe, leave an ample amount of space between the tongue and the knot.
Then, pull the tongue through the gap so the knot sits hidden underneath. This is a simple and quick method, but may be a bit uncomfortable if your vans fit tight. Alternatively, lace your Vans using the bar method, and once you get to the bottom, rather than tying the knot on the outside of the shoe, tie it on the inside where the laces meet. Make sure that the knot is positioned on the outside of your foot to minimize any discomfort.
To lace Vans with five holes, or eyelet pairs, you can use either the classic or bar method, depending your own taste. However, Authentic Vans, with five eyelets are traditionally laced in the classic, criss-cross fashion. Vans with four holes on each side are a bit trickier. While you can lace them up all the way using the classic lacing method, some people choose to forego the last eyelet pair for an easier time slipping them on and off.
Trending Accessories. All products featured on FashionBeans are independently selected by our editors. However, when you buy something through our retail links, we may earn an affiliate commission. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Solid Ventures.
Follow our guide to ensure your lacing your vans the right way, we have made sure to include multiple options enabling you to pick the style best aligning with your personal preference. Cross lacing is perhaps the most popular way to lace Vans. If you want something a bit more unique, then maybe you should try ladder lacing. It also shows that you like a challenge, and more importantly, that you really know how to lace Vans. Last, but certainly not least is the interlocking lace.
This is one of the more complicated styles of lacing. Plus, it keeps shoes on tight, especially if you have slippery shoelaces. When you have mastered this style, only then can you rightfully say that you know how to lace Vans. Here are the steps:.
Now that you know how to lace Vans in five different ways, which method are you going to try first? Related articles — Vans vs Converse. How to Lace Vans the right Way! August 16, 0. This post may contain affiliate links. That means that if you click on a link and purchase something I recommend, I will receive a small commission at no extra cost to you.
This is how to lace Vans! Repeat on the left side. Pull the lace from the opposite direction until a bar is formed between the bottom eyelets. Repeat on the left side, making sure this time, you place the aglet in the right eyelet. Repeat this process until you get up to the tongue of your sneakers or wherever you feel most comfortable. When you get to the final two eyelets, insert the aglets upwards from inside of the shoe, towards you.
Reverse the lacing for the other shoe, meaning lead with the left this time to create a mirror effect with your laces. Grab one end of the shoelace in your right hand and place the aglet tip of the shoelace into the bottom right eyelet shoelace hole in a downwards motion.
Insert each end of the shoelace downward through the bottom eyelets. Push both ends of the shoelaces through the eyelets closest to the toe of the sneaker. Pull the ends of the laces up over the bar and then downward toward the toe. Cross the right lace over to the left side. Insert it down through the second eyelet going up the shoe. The right lace should now be crossing the tongue of the shoe with left lace emerging from between the bar and the cross-lace.
Pull the crossed lace to the left away from the shoe to get it out of the way. It's usually easiest to do this with the shoes off and the sneaker facing you. Just stay consistent and the end result will be the same. Cross the left lace over to the right side. Insert it downward through the second eyelet up on that side, just as you did on the other side. You should now have a bar and two cross-laces in your lacing.
Pull the newly-crossed lace to the right away from the shoe to get it out of the way. Continue lacing in this pattern. Start by crossing the lace on the right-hand side over to the left side and downward through the eyelet, making sure that the other lace now emerges from between two crossings.
Pull the newly-crossed lace to the left to get it out of the way, then cross the left lace over to the right side.
Repeat until the shoe is completely laced. Lacing the shoes this way ensures that cross-laces going in one direction always dominate the cross-laces going in the other. When the time comes to lace your other shoe, be sure to reverse the process so that your laces mirror each other. Method 3. Keep your shoelaces from twisting. The straight, flat-laced look is classic Vans, so don't let your laces get sloppy or it won't look right. If you want your vans to look crisp and new, keep the laces as straight as possible.
Every time you pull your laces through the eyelets, make sure to flatten them out and keep them from twisting up. Don't over-tighten the laces, which can cause them to bunch up and look uneven, if they're actually pretty straight. Take your shoes off and turn them to face you.
It's a lot easier to lace up your sneakers when they're on the ground, with the toe facing you, instead of the other way around. If you want them to look right, take them off and turn them around.
Use thick white laces. Vans white laces are usually the best laces for Vans, but any variety of white sneaker lace would be fine. In general, skate laces are pretty puffy and white, whereas some basketball laces can be really thin and cylindrical, or other sneaker laces can be kind of lighter. You can use any color, of course, but new white laces are the most commonly associated with Vans. Change your laces regularly.
Having a fresh set of laces always looks cool. It's a good idea to change your laces every couple of weeks, especially if you're skating regularly and breaking laces, or scuffing them up. Change up the way you lace your shoes. To get the most life out of your shoes, it's a good idea to alternate between the styles you use when you lace your shoes, so that they won't wear from repeated lacings. If you bar-lace your shoes, cross-lace them every now and then to keep them looking new If you cross-laces your Vans, change the direction of the crosses, so that the right side isn't always over the left, or vice versa.
This will help to keep the shoes from wearing unevenly. Most people tuck the rest of the lace under the tongue after lacing. Not Helpful 20 Helpful You can tie the laces behind the tongue of your shoes and tuck the laces under the tongue. Not Helpful 15 Helpful Not Helpful 46 Helpful It isn't a matter of which on is better -- either you like the cross lace or the bar lace.
It's more of a matter of which one fits you best. Not Helpful 63 Helpful Not Helpful 49 Helpful You can put them into the shoe, then wear them with the laces inside the shoe to hide them. Not Helpful 21 Helpful No, it's easier to lace them without having your feet in them. Lace them loosely, then insert your feet and tighten.
0コメント